Products
Ultraviolet Absorbent UV-1164
Synonyms:Phenol,2-(4,6-di-2,4-xylyl-s-triazin-2-yl)-5-(octyloxy)- (7CI,8CI);2,4-Bis(2,4-dimethylphenyl)-6-(2-hydroxy-4-octyloxyphenyl)-1,3,5-triazine;2,6-Bis(2,4-dimethylphenyl)-4-(2-hydroxy-4-octyloxyphenyl)-s-triazine;CyagardUV 1164;Cyasorb 1164;Cyasorb UV 1164;Cytec UV 1164;Tinuvin 1545;Phenol,2-[4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl]-5-(octyloxy)-;
Chemical Property of Ultraviolet Absorbent UV-1164
● Appearance/Colour:light yellow powder
● Vapor Pressure:0mmHg at 25°C
● Melting Point:88-91 ºC
● Refractive Index:1.575
● Boiling Point:695.242 ºC at 760 mmHg
● PKA:8.45±0.40(Predicted)
● Flash Point:374.269 ºC
● PSA：68.13000
● Density:1.089 g/cm3
● LogP:8.55110
● Storage Temp.:Sealed in dry,Room Temperature
● Solubility.:Chloroform (Slightly)
● Water Solubility.:3.318μg/L at 25℃
Safty Information
● Pictogram(s):
● Hazard Codes:
Useful
Description:UV Cyasorb 1164 has a very low volatility and is very compatible with polymers and other additives.This product is suitable for polyoxymethylene, polyamide, polycarbonate, polyethylene, polyether amine, ABS resin and polymethyl methacrylate. Especially suitable for nylon and engineering plastics.
Uses:UV Absorber 1164 is used as a stabilizer for olefin polymers intended for use in contact with food. UV Absorber 1164, full name 2-[4,6-Bis(2,4-dimethylphenyl)-1,3,5-triazin-2- yl]-5-(octyloxy)phenol is also used as UV light absorber/stabilizer in other polymers.
Detailed Introduction
Ultraviolet Absorbent UV-1164 is a chemical compound that is commonly used as a UV absorber in various applications. It belongs to the class of ultraviolet (UV) absorbers, which are compounds that can absorb UV radiation and help protect materials from degradation caused by exposure to sunlight.
UV-1164 is specifically designed to absorb UV radiation in the range of 270-360 nm, which corresponds to the UVA and UVB regions of the electromagnetic spectrum. It is often added to products that are susceptible to UV-induced degradation, such as plastics, coatings, adhesives, and textiles.
By absorbing UV radiation, UV-1164 can prevent or reduce the fading, discoloration, and deterioration of materials caused by exposure to sunlight. It helps to stabilize the physical and chemical properties of the materials and prolong their lifespan. UV-1164 achieves this by converting the absorbed UV energy into a less destructive form, such as heat.
UV-1164 is typically incorporated into formulations at low concentrations, usually ranging from 0.1 to 5%, depending on the specific application and desired level of UV protection. The compound is known for its good compatibility with various polymers and its resistance to migration, meaning it stays in the target material rather than leaching out over time.
Due to its effectiveness and versatility, UV-1164 is widely used in industries such as plastics manufacturing, automotive coatings, paints, and textile production. It is also used in the production of films, sheets, and other materials that require UV protection.
It is important to note that UV-1164 is a chemical compound and should be handled and used according to the safety guidelines provided by the manufacturer. This may include wearing appropriate protective equipment, using proper ventilation, and following storage and disposal procedures.
Application
Ultraviolet Absorbent UV-1164 is commonly used as a UV stabilizer in various applications to protect materials from degradation caused by exposure to UV radiation. Here are some specific applications where UV-1164 is commonly used:
Plastics: UV-1164 is often added to plastic products to prevent yellowing, cracking, or loss of mechanical properties caused by UV exposure. It is used in a wide range of plastic materials, including polyethylene, polypropylene, polystyrene, polycarbonate, and more.
Coatings:UV-1164 is utilized in coatings, such as paints, varnishes, and clear coats, to enhance their resistance to fading, chalking, and loss of gloss caused by UV radiation. It helps maintain the appearance and durability of coatings, especially those exposed to outdoor conditions.
Adhesives and sealants: UV-1164 is added to adhesive formulations to improve their resistance to UV degradation. It helps preserve the bonding strength and durability of adhesive joints, particularly in applications where the adhesive will be exposed to sunlight.
Textiles: UV-1164 is used in the manufacturing of textiles to protect them from the deteriorating effects of UV radiation. It helps prevent fading, color change, and degradation of the fabric's mechanical properties. UV-1164 can be applied during the dyeing or finishing processes of textiles.
Films and sheets: UV-1164 is often incorporated into the production of films and sheets, such as agricultural films, construction films, and packaging materials. It helps extend their lifespan and maintain their clarity and mechanical properties, even under prolonged UV exposure.
It's worth mentioning that the specific application and recommended concentration of UV-1164 may vary depending on the material, desired level of protection, and the formulation requirements. Manufacturers typically provide guidelines and recommendations for the optimal use of UV-1164 in different applications.
